- Frames & Accessories
- Rotorious FPV Micro Frames
- RIP 120 BRUSHLESS
RIP 120 BRUSHLESS
The RIP 120 is a 120mm true x frame, it’s designed to be a small, lightweight and durable fpv platform that packs all the punch of its much larger rivals. You can easily build a RIP 120 to be under 100g including a 500mah 2s pack, this makes it feel hella powerful and agile. When built correctly, the way this flies will surprise you and before you know it, your 250s will be gathering dust. The RIP is at home in the yard or the park and will take all the beatings you want to put on it. It’l accept an Fx798T all in one FPV camera or a separate pico FPV camera, you can set your preferred tilt angle with these options from 12.5-35 degrees. The RIP is constructed to the highest standards using the strongest carbon in a fly matte finish, the standoffs are lightweight aluminium and the bolts are titanium to get the weight down while retaining the strength of heavier steel bolts. No corners cut here.
Included in the hardware kit is everything needed to build this up with either separate escs or a 20×20 4in1 esc.
Please check the recommended parts tab for information on recommended components.
I personally recommend the Rotorx 1105b 6500KVs, a 6-12a small esc, an Omnibus F3 PDB flight controller, an FX798t all in one fpv camera and either a LemonRX satellite if you fly DSM or a Frsky XM+ if you fly Frsky. The Lipos I’d recommend really depend on your choice of propeller and motor KV.
If you have any questions, please ask on the Rotorious FPV Underground Facebook group so we can share the information.
First come, first serve on color options but we do have red, blue, and green color options Add a note upon check-out and if we have it left you'll get it. If not, we'll send next available or at random.
• RIP 120 main frame plate
• Hardware kits (12 titanium bolts, 4 aluminium bolts, 14 aluminium standoffs)
• TPU printed camera adapters
Frame weight: 20.6g fully assembled