This website uses marketing and tracking technologies. Opting out of this will opt you out of all cookies, except for those needed to run the website. Note that some products may not work as well without tracking cookies.
Opt Out of CookiesOn Sale
On Sale
EMAX EZ Pilot Beginner Learning Indoor Racing Stem Drone Ready to Fly Kit
$120.00
$110.00
Sold out
The EMAX EZ Pilot was designed to allow anyone to have an entertaining, intuitive flight experience within the confines of their own home.Their new EZ Flight control software features Smart Height Assist that allows the pilot to focus more on flying than throttle management, and a new one stick control mode allows beginners to steer in any direction without needing to manage two control inputs. With the EZ Pilot, anyone can learn the basics of FPV flight in minutes!
Features:
- Real-time Hobby-grade First-Person-View (FPV) Video Transmission System
- Gyroscopic Self-leveling with 3-modes from beginner to advanced
- Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode.
- EZ One Stick Control that mixes yaw and roll into one stick for simple, intuitive flight feel
- On-board FPV camera to experience flight from inside the aircraft
- 4 Minute flight time with included 450mah 1S battery
- Ergonomic Radio Controller and Comfort Fit FPV Virtual Reality Goggle included
Includes:
1x EZ-Pilot Indoor Drone
1x EZ-Pilot Controller
1x Transporter 5.8G FPV Goggles w/ 1x linear antenna included + second SMA port for upgrade/expansion
1x Transporter USB-rechargable 18650 Battery Pack
1x 450mah 1S 4.35V HV LiPo Battery
1x USB-powered 1S Charger
2x CW 2x CCW EZ Pilot Replacement Props
1x Micro USB Cable
1x EZ-Pilot Decal Customization Kit
UPC: 691036971855
On Sale
On Sale
EMAX Tinyhawk Brushless 75mm Indoor Racing Stem Drone Frsky BNF
$100.00
$90.00
Sold out
MAX Tiny Hawk 75mm Indoor Racing Stem Drone
Key Features:
75mm Indoor racing drone
08025 brushless motor with durable ball bearing for increase flight and low maintenance
Durable polypropylene plastic frame with propeller guards
Motor beeper function. Find your tinyhawk after a crash
Speeds up to 56kph
Up to 4 minutes flight time on single battery
Fast F4 Processor for smooth stable flight characteristics
MPU6000 gyro for vibration free operations
Unique inverted motor design to keep CG as low as possible to fit in the smallest of spaces
25mw VTX and 600tvl Camera included for fun FPV flight via FPV style goggles
Smart Audio function to change VTX channel via your transmitter
OSD settings control to customize flight feel
Pre-tuned from factory with expert pilots and new pilots in mind. 3 rate profile settings for all types of flying feel
Plug in type motors for easy maintenance
1s High Voltage (HV) 450mah lipo included
Frsky compatible D8 receiver built in to FC
Custom carbon fiber themed carrying case
Frame Properties:
Size: 75mm motor to motor L 110mm x W 95mm x H 39mm
Dry Weight: 29g
All Up Weight: 42g with 450mah 1s Battery
Frame Material: Polypropylene
Propeller Properties:
Diameter: 40mm
Blades: 3
Pitch: 23mm
Weight: 0.5 g
Motor Properties;
Stator: 8mm x 2.5mm (08025)
Kv: 15000kv
Weight: 2.5g
Bearing Size: Φ1.5*Φ4*2mm
Shaft Diameter: Φ1.5mm
Propeller Mount: Press Fit Over Bell
Main PCB:
Flight Controller: F4(MATEKF411 firmware)
ESCs: 4in1 3A
Receiver: EMAX Tiny receiver (Compatible with Frsky D8 mode)
Battery Connector: JST-PH2
Camera and VTX:
VTX Power: 25mw
Channels: 37CH
Camera Properties: 600TVL CMOS
Smart Audio
Battery:
Voltage: 1s 4.35v HV
Capacity: 450 mAh
Discharge rating: 80c/160c
Included in package:
Light weight soft carry case, with carbon fiber look
Tiny Hawk indoor flying drone
USB High Voltage capable 4 port USB Charger
1s High Voltage (HV) 450mah lipo battery. GNB powered
On Sale
On Sale
Backorder The New Diatone MXC Taycan V1.1 349 3 Inch 158mm 4S Cinewhoop FPV Racing Drone BNF Frsky R-XSR RUNCAM NANO2
$230.00
$220.00
Sold out
The New Diatone MXC Taycan V1.1 349 3 Inch 158mm 4S Cinewhoop FPV Racing Drone BNF Frsky R-XSR RUNCAM NANO2
Specifications
- Camera: RunCam Nano 2
- Antenna: Foxeer Lollipop 3
- VTX: Mamba TX400
- FC: MAMBA F405MINI MK3
- ESC: MAMBA F25MK2 /25A ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 3750KV
- Receiver:FrSky R-XSR
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 4S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1x Diatone BNF MXC 349Taycan 4S 3" Cinewhoop - FrSky R-XSR
"Does not include transmitter, googles, batteries, or charger"
Recommend Lipo size:4S 1300-1500mah (Flight time:5-7min)
On Sale
On Sale
Backorder The New Diatone MXC Taycan 369 V1.1 3 Inch 158mm 6S Cinewhoop FPV Racing Drone BNF Frsky R-XSR RUNCAM NANO2
$240.00
$220.00
Sold out
The New Diatone MXC Taycan V1.1 369 3 Inch 158mm 6S Cinewhoop FPV Racing Drone BNF Frsky R-XSR RUNCAM NANO2
Specifications
- Camera: RunCam Nano 2
- Antenna: Foxeer Lollipop 3
- VTX: Mamba TX400
- FC: MAMBA F405MINI MK3
- ESC: MAMBA F35 / 35A ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 2700KV
- Receiver:FrSky R-XSR
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 6S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1x Diatone BNF MXC Taycan V1.1 6S 3" Cinewhoop - FrSky R-XSR
"Does not include transmitter, googles, batteries, or charger"
Recommend Lipo size:6S 1050 -1300mah (Flight time:6-9min)
On Sale
On Sale
Backorder Updated The New Diatone MXC Taycan V1.1 369 3 Inch 158mm 6S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
$220.00
$200.00
Sold out
Updated The New Diatone MXC Taycan V1.1 369 3 Inch 158mm 6S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
Specifications
- Camera: RunCam Nano 2
- Antenna: Foxeer Lollipop 3
- VTX: Mamba TX400
- FC: MAMBA F405MINI MK3
- ESC: MAMBA F35 / 35A ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 2700KV
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 6S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1x Diatone PNP MXC Taycan 6S 3" Cinewhoop No Receiver
"Does not include transmitter, receiver, googles, batteries, or charger"
Recommend Lipo size:6S1050 -1300mah (Flight time:6-9min)
On Sale
On Sale
Instock The New Diatone MXC TAYCAN 3 Inch 158mm Cinewhoop Frame Kit with Duct for RC Drone FPV Filming
$105.00
$70.00
Sold out
DIATONE MXC TAYCAN 3 Inch 158mm Cinewhoop Frame Kit with Duct for RC Drone FPV Filming
MXC TAYCAN-Frame Kit Specification
SKU: MX C3 Taycan rack DT-FK19-MXC3-TAYCAN
Wheelbase: 158mm
Weight: 175g
Paddle size: 3 inch
Top plate: 2mm
Base plate: 2.5mm
Voltage (Recommendation): 4-6S
Flight control mounting hole : 20mm (M2) /30.5mm (M3)
Motor mounting hole position: 12mm
Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Package Included:
1 x MXC TAYCAN 3 Inch Frame Kit
Recommend parts (Not Included):
Camera: RUNCAM NANO2
Antenna: FOXEER Lolipop 3
VTX: MAMBA TX400 400mW
FC: MAMBA F405MINI MK3
ESC: MAMBA F25MK2 /25A 4S ESC Dshot 600 OR
MAMBA F35 /35A 6S ESC Dshot 600
MOTOR: MAMBA Racing MB1408 4000KV/2800KV
Battery: 4S: 1300-1500mah (Flight time: 5-7min)
6S: 1050 -1300mah (Flight time: 6-9min)
On Sale
On Sale
INSTOCK DIATONE MXC TAYCAN SW2812 LED-DUCT 3INCH FREESTYLE FPV DRONE DJI AIR UNIT349 3 Inch 158mm 4S Cinewhoop FPV Racing Drone PNF DJI FPV Air Unit
$400.00
$380.00
Sold out
The ultimate cinematography cinematic micro drone for all your indoor and outdoor flying close proximity filming needs. The New Diatone MXC Taycan 349 3 Inch 158mm SW2812 LED-DUCT 4S Cinewhoop FPV Racing Drone PNF DJI FPV Air Unit
Specifications
- Camera: DJI Air unit
- Antenna: DJI MMXC
- VTX: DJI Air unit
- FC: MAMBA F405MINI MK3 DJI
- ESC: MAMBA F25MK2 /25A 4S ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 3750KV
- Receiver: None
- Flight time:5-7 min
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 4S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1x Diatone PNP MXC Taycan 4S 3" Cinewhoop - DJI FPV Air Unit
"Does not include transmitter, receiver, googles, batteries, or charger"
Recommend Lipo size:4S 1300-1500mah (Flight time:5-7min)
On Sale
On Sale
BACKORDER DIATONE MXC TAYCAN SW2812 LED-DUCT 3INCH FREESTYLE FPV DRONE DJI AIR UNIT369 3 Inch 158mm 6S Cinewhoop FPV Racing Drone PNF DJI FPV Air Unit
$410.00
$390.00
Sold out
The ultimate cinematography cinematic micro drone for all your indoor and outdoor flying close proximity filming needs. The New Diatone MXC Taycan 369 3 Inch 158mm SW2812 LED-DUCT 6S Cinewhoop FPV Racing Drone PNF DJI FPV Air Unit
Specifications
- Camera: DJI Air unit
- Antenna: DJI MMXC
- VTX: DJI Air unit
- FC: MAMBA F405MINI MK3 DJI
- ESC: MAMBA F35 /35A 6S ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 27000KV
- Receiver: None
- Flight time:6-9 min
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 4S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1x Diatone PNP MXC Taycan 6S 3" Cinewhoop - DJI FPV Air Unit
"Does not include transmitter, receiver, googles, batteries, or charger"
Recommend Lipo size:6S:1050 (Flight time:6-9min)
On Sale
On Sale
Backorder Updated The New Diatone MXC Taycan V1.1 349 3 Inch 158mm 4S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
$220.00
$180.00
Sold out
The New Diatone MXC Taycan V1.1 349 3 Inch 158mm 4S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
Specifications
- Camera: RunCam Nano 2
- Antenna: Foxeer Lollipop
- VTX: Mamba TX400
- FC: MAMBA F405MINI MK3
- ESC: MAMBA F25MK2 /25A 4S ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 3750KV
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 6S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1 x Diatone PNP MXC 349 Taycan V1.1 4S 3" Cinewhoop No Receiver
"Does not include transmitter, receiver, googles, batteries, or charger"
Recommend Lipo size:4S 1300-1500mah (Flight time:5-7min)
On Sale
On Sale
Backorder The New Diatone MXC Taycan SW2812 Led Duct 349 3 Inch 158mm 4S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
$230.00
$200.00
Sold out
The New Diatone MXC Taycan SW2812 Led Duct 349 3 Inch 158mm 4S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
Specifications
- Camera: RunCam Nano 2
- Antenna: Foxeer Lollipop
- VTX: Mamba TX400
- FC: MAMBA F405MINI MK3
- ESC: MAMBA F25MK2 /25A 4S ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 3750KV
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 6S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1 x Diatone PNP MXC 349 Taycan SW2812 Led Duct 4S 3" Cinewhoop No Receiver
"Does not include transmitter, receiver, googles, batteries, or charger"
Recommend Lipo size:4S 1300-1500mah (Flight time:5-7min)
On Sale
On Sale
Backorder Updated The New Diatone MXC Taycan SW2812 Led Duct 369 3 Inch 158mm 6S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
$240.00
$210.00
Sold out
Updated The New Diatone MXC Taycan SW2812 Led Duct 369 3 Inch 158mm 6S Cinewhoop FPV Racing Drone PNF RUNCAM NANO2
Specifications
- Camera: RunCam Nano 2
- Antenna: Foxeer Lollipop 3
- VTX: Mamba TX400
- FC: MAMBA F405MINI MK3
- ESC: MAMBA F35 / 35A ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 2700KV
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 6S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1x Diatone PNP MXC Taycan SW2812 Led Duct 6S 3" Cinewhoop No Receiver
"Does not include transmitter, receiver, googles, batteries, or charger"
Recommend Lipo size:6S1050 -1300mah (Flight time:6-9min)
On Sale
On Sale
Backorder The New Diatone MXC Taycan 369 SW2812 Led Duct 3 Inch 158mm 6S Cinewhoop FPV Racing Drone BNF Frsky R-XSR RUNCAM NANO2
$240.00
$230.00
Sold out
The New Diatone MXC Taycan SW2812 Led Duct 369 3 Inch 158mm 6S Cinewhoop FPV Racing Drone BNF Frsky R-XSR RUNCAM NANO2
Specifications
- Camera: RunCam Nano 2
- Antenna: Foxeer Lollipop 3
- VTX: Mamba TX400
- FC: MAMBA F405MINI MK3
- ESC: MAMBA F35 / 35A ESC Dshot 600
- Motor: MAMBA TOK Racing MB1606 2700KV
- Receiver:FrSky R-XSR
Frame
- Wheelbase: 158mm
- Weight: 175g
- Paddle size: 3 inch
- Top plate: 2mm
- Base plate: 2.5mm
- Voltage (Recommendation): 6S
- Flight control mounting hole : 20mm (M2) /30.5mm (M3)
- Motor mounting hole position: 12mm
- Camera pitch: 19mm, DJI sky end (20mm), compatible with 4K dual camera
Includes
- 1x Diatone BNF MXC Taycan SW2812 Led Duct 6S 3" Cinewhoop - FrSky R-XSR
"Does not include transmitter, googles, batteries, or charger"
Recommend Lipo size:6S 1050 -1300mah (Flight time:6-9min)
Get Gear up!
We are here to provide you quality and affordable products to build your 1st quadcopter or your 20th. We are always just a phone call away.